With other cameras – Nikon Autofocus Speedlight SB-24 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

With other cameras:
(1) Push select button so "ISO” starts blinking in the LCD panel.

(2) While “ISO” is blinking, press the adjustment button

to set the film speed in use.

• If you do not press the adjustment button for approx. 8

seconds or more, "ISO" automatically stops blinking. To

reactivate "ISO," press the select button again.

(3) When the desired film speed appears, press select button

again to cancel blinking.

• If "ISO" stops blinking automatically, you do not need to

press the select button again.

Except in Non-TTL Auto H flash mode, the film speed is

essentially just a number displayed in the LCD panel. This

means that, even if the displayed ISO number is incorrect,

as long all other camera and speedlight settings are

correct, the subject will be correctly exposed. Therefore,
fhe ISO setting cannot be used as an exposure compen
sation control. A separate exposure compensation control
provides that opportunity.