Nikon Autofocus Speedlight SB-24 User Manual

Page 121

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

TTL auto flash is not possible when using Nikon F-401s/N4004s

with SB-11/14/140 (even with SC-23) or SB-21 B. These speed-

lights cannot be used for TTL multiple flash either, even as slave

flash units.
See system chart on the following pages,

• Set the fxiwer switch of slave flash units at ON position, not at

STBY. When using SB-24, SB-22 or SB-20 as a slave unit with
the power switch at STBY position, lightly pressing the shutter
release button does not activate them. The same thing also

happens when you set SB-23 to TTL (STBY); do not use SB-23
as a slave flash unit.