Setting power switch, Licslji^grttrnitnntjj – Nikon Autofocus Speedlight SB-24 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING POWER SWITCH
OFFfiiON
licsLJi^grTTrniTnnTJJ
a(^ Itsncati
off
T
b
I
on
To turn on the speedlight unit, use either STBY (STANDBY) or
ON settings. With Nikon F4, F-801/N8008, F-501/N2020,
F-401S/N4004S, F-301/N2000, FA, FE2, or FG, to conserve
energy, use STBY position,
STBY (STAN DBY) Position
—With Nikon F4, F-801/N8008, F-501/N2020,
F-401S/N4004S, F-301/N2000, FA, FE2, or FG
In most cases, use STBY position to turn on the SB-24. In STBY
position, approx. 80 seconds after the camera's meter turns off,
the SB-24 turns off to conserve power. To turn the SB-24 on
again, lightiy press the camera’s shutter reiease button or the
SB-24's open-flash button.
• When using a remote cord with a Nikon FA or FE2 connected
to Nikon Motor Drive MD-12, the camera remains on as iong
as the MD-12's power switch is on. (At STBY position SB-24
does not turn off.)
14