Setting before shooting, Installing batteries, Setting before shooting -24 – Nikon Autofocus Speedlight SB-24 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETTING BEFORE SHOOTING

INSTALLING BATTERIES

4 Close the battery chamber lid, then

' slide cover back to close.

2 Slide the meter/feet lever to select

' the desired indication (meters or feet)

on the LCD panel. (Set at meters when
shipped from factory.)

3 Load four 1.5V AA-type penlight

" alkaline-manganese or 1.2 V NiCd

batteries into the battery chamber. Be
sure to follow the indicators

inside the chamber to ensure batteries

are properly loaded.

For an external power source, use

optional Nikon DC Unit SD-7. For
battery information, see page 95.