Nikon SB 20 User Manual
Nikon
Table of contents
Document Outline
- F-801/N8008+SB-20
- Zur Beachtung:
- Notes:
- F4/F4S+SB-20
- F-801/N8008-I-SB-20
- Notas:
- FOREWORD=
- NOMENCLATURE
- 41
- 12. Set power switch to STBY (standby ‘ position) to turn on SB-20.
- 14. Fully depress shutter ' release button to take picture.
- 2. Set aperture.
- 3 Lightly press camera shutter release ■ button.
- ^ Confirm whether the green in-focus ' indicator LED iights up, then fuliy depress the shutter reiease button.
- SETTING CAMERA SHUTTER SPEED
- DETERMINING APERTURE
- TTL Mode
- (for TTL Automatic Flash Exposure Control)
- A Mode (for Non-TTL Automatic Flash Exposure Control)
- 2_ Align film speed in use with film speed ' index.
- 3_ To read proper shooting distance range,
- ' set distance scale selector to letter shown in zoom indicator window.
- 4, Select appropriate aperture and set aperture index knob.
- Usable apertures/shooting distance range in A mode unit; m (ft)
- Exposure compensation in A mode
- M Mode (for Manual Flash Exposure Control)
- Align film speed in use ' with the film speed index.
- Choose and set aperture.
- Set light output selector to appropriate ' setting.
- 2, Determine and set proper iens aperture.
- Guide Number
- SETTING POWER SWITCH
- READY-LIGHT INDICATIONS
- SYNCHRO-SUNLIGHT FILL-IN FLASH PHOTOGRAPHY
- SYNCHRONIZATION WITH
- MOTOR-DRIVEN CAMERA
- MULTIPLE FLASH EXPOSURES
- MULTIPLE FLASH PHOTOGRAPHY
- AVOIDING ‘RED EYE”
- CLOSE-UP FLASH PHOTOGRAPHY IN TTL MODE
- TIPS ON SPEEDLIGHT CARE
- ABOUT BATTERIES
- ACCESSORIES
- SPECIFICATIONS
- NIKON CORPORATION