Setting power switch, Stby (standby) position – Nikon SB 20 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING POWER SWITCH
STBY (STANDBY) Position
Use to conserve energy and shorten recycling time.
With Nikon F-501/N2020, F-401/N4004, F-301/
N2000, FA, FE2, and FG:
Use the SB-20’s STBY position to turn on the SB-20.
In STBY position, when the camera's meter turns off, in
one or two minutes the SB-20 turns otf automatically.
To turn the SB-20 on again, lightly press the camera’s
shutter release button.
Note:
When the Nikon FA or FE2 is connected to Nikon Motor
Drive MD-12 via a remote cord, the camera's meter stays on
and the SB-20 remains on at STBY position.