Nikon SB 20 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•Keep the SB-20 away from salt
wafer and out of the rain.
• When not using the SB-20, re
move batteries to avoid damage
due to battery leakage. If leakage
occurs, fake the SB-20 to your
nearest Nikon authorized service
facility.
•When the SB-20 is not used, per
form the following once a month:
1. Install batteries, turn on the
SB-20 and fire flash a few
times.
2. Wait until the ready-light comes
on.
3. Turn off the SB-20, and remove
the batteries.
49