Nikon Camera N60 - Manual (Page 73)

Lens servo AF: Auto-Servo AF : Camera automatically chooses Single Servo
AF or Continuous Sen/o AF operation according to the subject
status, i.e. stationary or moving (including directional
information).
• Single Servo AF: Once focused on a subject, focus is locked
• Continuous Servo AF: The camera continuously focuses on a
moving subject
M: Manual
Focus lock Focus is locked when shutter release button is lightly pressed and
subject is in focus in Single Servo AF
Exposure metering 3D Matrix: with D-type AF Nikkor
Six-segment Matrix: with non-D-type AF Nikkor (except AF lens for
F3AF and IX-Nikkor), Al-P Nikkor
Center-Weighted: in Manual exposure mode or with Auto Exposure
Lock
Metering range EV1 to EV 20 at ISO 100, 50mm f/1.4 lens
Film speed setting Automatically set to ISO speed of DX-coded film used; film speed
range: ISO 25 to 5000
Exposure meter Activated by turning on power, lightly pressing shutter release
button; stays on for 5 sec. after removing finger from button, or 2
sec. after releasing shutter
Exposure
compensation
With exposure compensation button;
±3 EV range, in 1/2 steps (in P, S, A and M mode)
Auto exposure lock By pressing AE-L (auto exposure lock) button while exposure meter
is activated (Center-Weighted Metering is automatically selected.)
Shutter Electromagnetically controlled vertical-travel focal-plane shutter
Shutter speeds • In iS, P, A, 2, B, », -4;, IS: 30 to 1/2000 sec. automatically set
• In S, M: 30 to 1/2000 sec.. Long Time Exposure (only be
selected in M)
Self-timer Electronically controlled; timer duration: 10 sec.; cancelable
Sync contact • X-contact only (semiconductor-type); flash synchronization up
to 1/125 sec.
• Automatically set to 1 /125 sec. when shutter speed is set to
1/2000 to 1/180 sec.
73