Using built-in speedlight, Matrix balanced fill-flash, Note: continuous use of built-in speedlight – Nikon Camera N60 User Manual
Page 28: Using built-in speedlight -29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8
Using Built-In Speedlight
If
i
(ready-light indication) blinks
in the viewfinder when you
lightly press the shutter release
button, use the built-in
Speedlight.
8.1
Press the Speedlight lock-release button to release
the Speedlight.
>
As soon as the Speedlight is released it starts recharging, and when the
Speedlight is ready to fire ^ appears without blinking in the viewfinder
(when the camera's meter is on).
>
To close the Speedlight, press gently until it clicks shut. (To conserve
power, keep the Speedlight closed when it is not in use.)
Matrix Balanced Fill-Flash
Matrix Balanced Fill-Flash enables proper evaluation of exposure for the
main subject and background, and ensures adequate flash output. (For
details, see page 58.)
NOTE: Continuous use of built-in Speedlight
After continuous use of the built-in Speedlight, it may stop firing to
protect the firing tube. Wait for a while before using the Speedlight
again.
28