Load film, Pull film leader out to red index mark, Load film -19 – Nikon Camera N60 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Load Film

Use a DX-coded film. Film speed

is set automatically (IS025-

5000).

When the camera is turned on,
film is loaded and the camera

back is closed, the film automat
ically advances to the first frame.

3.1

Turn on the main switch, then open the camera back

and insert film.

3.2

• Insert from the bottom of the film cartridge.

Pull film leader out to red index mark.

Do not insert the film leader beyond the red index mark.

Hold the film cartridge and ensure film is properly positioned with no

slack.