Ip: auto-multi program, Set the exposure mode dial to p, Confirm focus indicator • and shoot – Nikon Camera N60 User Manual

Page 40: Note; flexible program, Shooting in each exposure mode-contmued

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Shooting in Each Exposure Mode-contmued

IP: Auto-Multi Program

The camera automatically controls your

exposure to achieve a correct exposure in
any shooting situation. For more complex
shooting, use Flexible Program (below) or
exposure compensation (page 50).

For other available mode combinations,

see page 64.

Set the exposure mode dial to P.

Confirm focus indicator • and shoot.

• When the subject is too dark or bright, one of the following warning

indications will appear In the viewfinder or LCD panel.
• H I: Use ND filter.
• l-o: Use Speedlight.

NOTE; Flexible Program

iiS

I Q

5.5

In Auto-Multi Program, by rotating the

Command Dial you can change the
combination of shutter speed and
aperture while maintaining a correct

exposure. With this function, you can
shoot in Auto-Multi Program as though
shooting in Shutter-Priority Auto or

Aperture-Priority Auto, 13 appears in the LCD panel when the Flexible

Program is used. To cancel the Flexible Program, reset the shutter

speed-aperture combination to the original value, change the exposure
mode, turn off the main switch, or use the built-in Speedlight (page 28) or
perform Two-Button Reset (page 57).