Mount lens and set aperture, Set the lens’ aperture to its minimum and lock, Mount lens and set aperture -17 – Nikon Camera N60 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Mount Lens and Set Aperture
Mount the lens to the camera
body and set the lens’ aperture
to its minimum setting (largest f-
number) for automatic
operation.
2.1
Turn the main switch off and mount lens to the
camera body.
2.2
• Position lens in the camera’s bayonet mount so that the mounting indexes
on lens and camera body are aligned, then twist lens counterclockwise
until it locks into place. (Be sure not to touch the lens release button.)
• When the lens is not attached or when a non-CPU lens is attached and
the main switch is turned on,
f
- - blinks in the LCD panel and viewfinder
and the shutter cannot be released, (
f
- - does not blink and shutter can be
released when the exposure mode Is set to manual.)
Set the lens’ aperture to its minimum and lock.
• When the lens Is not set to Its minimum aperture setting and the main
switch is turned on,
f
EE blinks in the LCD panel and viewfinder and the
shutter cannot be released.
16