Continuous frame shooting (c) – Nikon ML-3 Modulite Remote Control Set User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Continuous frame shooting (C)

Set the transmitter’s

shooting mode seiector to C.

• if the camera’s focus mode

is set to S, the camera may

not focus correctiy when

the transmission button is

pressed lightly.
Be sure to set the camera’s

focus mode to C.

• Depending on the shooting

situation, set the camera's

focus mode to M. In this

case, be sure to adjust

focus

manually

before

shooting.

Point the transmitter in the direction of the reception sensor and

■ lightly press the transmission button. The monitor light on the

transmitter will light up for a moment. Then, the reception indicator

LED also lights up for a moment and the camera’s exposure meter

turns on. In the autofocus mode, focus detection starts

immediately.

If a connected Speedlight is set at STBY (standby), it also turns on.