Nikon ML-3 Modulite Remote Control Set User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Insert the bracket between

I the tripod head and the

camera. Then, screw the

tripod’s lock nut firmly to

secure the assembly.

Insert the receiver into the
bracket and tighten the lock

screw.

•

Make sure the receiver

and/or bracket is not visible

in the viewfinder.

Insert the camera plug with

. the A symbol on the plug

pointing upwards into the
remote terminal of the

camera. Then screw the
threaded ring into the
terminal.

•

Make sure the remote cord

does not obstruct the

camera lens or the

receiver's reception sensor.