Sony KP-61XBR200 - Manual (Page 9)

Cable or antenna
Most simple connection. Connection is made
directly from the cable or antenna to the
projection TV.
(Rear of projectiorrTV)
VHF/UHF
Cable
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
(Rear of projection TV)
AUX
CATV cable
Antenna cable VHF/UHF
Ijl
Select Cable or ANT mode by pressing ANT
on the remote control.
Connecting a cable box
Some pay cable TV systems use scrambled ctr
encoded signals that require a cable box* to
view all channels.
Cable
IN OUT
*Cable box
Cable box and cable
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.).
‘Cable box
(Rear of projection TV)
VHF/UHF
(Rear of projection TV)
AUX
CATV cable
(unscrambled channels)
VHF/UHF
Note:
• If you will be controlling all channel
selection through your cable box, you
should consider using the CHANNEL EIX
feature, (see "CHANNEL FIX" on page
45)
For this set up, you can switch between
scrambled channels (through your cable box), and
normal (CATV) channels by pressing ANT on
your remote control.
Notes:
• You may be able to program your Sony
remote control to operate your cable box.
(see "Operating a Cable Box or DBS
Receiver" on page 54)
• During PIP, P&P,(ZHANNEL INDEX or
FAVORITE CHANNEL viewing, the AUX
input can only be viewed in the main picture.
• If you are connecting a cable box through the
AUX input and would like to switch between
the AUX and normal (CATV) input you
should consider using CHANNEL FIX.
(see "CHANNEL FIX" on page 45)
I