Sony KP-61XBR200 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(Rear of projection TV)
Cable
Satellite
antenna
cable
Connecting a DBS (Direct
Broadcast Satellite) receiver
1 Connect the cable from your satellite
antenna to your DBS receiver.
2 Attach the coaxial connector from your
cable or antenna to VHF/UHF on your
projection TV.
3 Using AUDIO connectors, connect
AUDIO OUT on your DBS receiver to
AUDIO IN on your projection TV (White-
AUDIO Left, Red-AUDIO Right).
4 Using an S VIDEO connector, connect S
VIDEO on your DBS receiver to S VIDEO
on your projection TV.
• To view input from the DBS, select the
U
W“W---- AUDIO-L (white)
video input which your DBS receiver is
V \
P
--------AUDIO-R (red)
connected to by pressing TV / VIDEO on
the remote control.
RK-74A (not supplied)
____L
Installing and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
DBS
SAT6(L
t
EIN
VHF/UHF
1^' *UM0 R *UDtO L VIOCO S VIDEO Î0l IN
¡©jouT
YC-15V/30V (not supplied)
10