Connecting an antenna/cable tv, System with a vcr, A and connecting the projection tv (continued) – Sony KP-61XBR200 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an antenna/cable TV
system with a VCR
1 Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2 Using AUDIO/VIDEO connectors,
connect AUDIO and VIDEO OUT on your
VCR to AUDIO and VIDEO IN on your
projection TV (Yellow-VIDEO, White-
AUDIO Left, Red-AUDIO Right).
3 Using a coaxial connector, connect OUT
on your VCR to VHF/UHF on your
projection TV.
Note:
• If you are connecting a monaural VCR,
connect only the single audio output to
the left (MONO) input on your projection
TV.
>a and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
(Rear of projection TV)
Cable