Sony KP-61XBR200 - Manual (Page 8)

Installing and Connecting the Projection TV (continued)
Connector Types
You mny tind it necessary to use some of the
following connector types during set up.
Coaxial cable
Standard TV cable and antenna connector
Plug Type
Screw-on Type
Z^ZZZ l I^-
S Video cable
High quality video connector for enhanced
picture quality
^ Align guides and
press into connection
AudioA/ideo cable
"*■ Press into connection
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
(Some DVD Players are equipped with the
following three video connectors.)
Y - Green
P b (C b , Cb,
or B-Y) - Blue
P r (C k , Cr, or R-Y) - Red
S-Link/CONTROL S cable
Sony connector for S-Link and CONTROL S
connections. These features are exclusive to
Sony products and allow greater control of
all Sony equipment.
Press into connection
GH Screw into connection
Q Press into connection
Note:
• For S-Link and CONTROL S connections,
you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can
purchase a separate S-Link / CONTROL S
cable (RK-G69HG).
Making Connections
For the best picture quality, a cable TV
system or outdoor antenna is recommended.
Connecting directly to cable or an
antenna
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see A); older homes will probably have 300-
ohm twin lead cable (see B); still other
homes may contain both (see C).
A
■ VHF only
or
■ VHF/UHF
or
■ Cable
' VHF only
or
' UHF only
or
VHF/UHF
75-ohm
coaxial cable
(Rear of
projection TV)
VHF/UHF
300-ohm twin
lead cable
(Rear of
projection TV)
VHF/UHF
Antenna connector
75-ohm coaxial cable
VHF
and
iW)
(Rear of
projection TV)
VHF/UHF
UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable