Using the tape counter, Notes, And rewind operations – Sony GV-500 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Tape Counter
During recording or playback, the digits on the counter indicate the actual recording or (Payback
time.
By noting the counter reading at a particular point, you can easily find that point later by
referring to the tape counter.
Notes
• The counter reading and the point on the tape may not correspond exactly. Use the counter as
a guide.
• There will be a time lag of several seconds on the counter reading after repeated fast-forward
and rewind operations.
• There will also be a time lag of several seconds when a tape recorded in both the LP or SP
modes or a tape having a blank portion between the recorded portions is played back.
• When you use non-recorded tape, counter does not ooerate.