2 press to move the pointer (v) to the, To cancel searching, To turn off the bar indication – Sony SLV-779HF User Manual
Page 76: Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching for a selected point on the tape (continued)
2
Press
to move the pointer (V) to the
point where you want to start playback.
The VCR starts searching and the cursor
(■ ) moves toward the pointer. When the
VCR locates the marked point, playback
starts.
To cancel searching
Press t> PLAY or ■ STOP.
To turn off the bar indication
Press DISPLAY again.
Notes
• The figure on the bar indication represents the total time length of the inserted tape
as shown below.
The total time length may not be displayed correctly for:
- tapes other than T-60, T-120, or T-160
- tapes recorded in more than one tape speed mode.
Tape type
Total time length
SP
LP
EP
T-60 or shorter
60
120
180
from T-80 to T-140
120
240
360
T-160 or longer
160
320
480
If you move the pointer (V) on the bar indication during search, the VCR searches
for the new reset point.
With the bar indication on, the F F / a n d ◄ ◄ S REW/'4" buttons on the
remote commander work only for moving the pointer (V), while the ► ► © FF and
REW buttons on the VCR are used for normal tape operation. Note, however,
if you press these buttons on the VCR, searching is canceled.
76
Additional Operations