Controlling other tvs with the remote commander – Sony SLV-779HF User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the remote commander (continued)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer's code
number.
1
Set |TV|/| VIDEOI at the top of the remote commander to |TV|.
2
Hold down l/(l), and enter your TV's code number(s) using the number
buttons. Then release l/(l).
Now you can use the l/(l), VOL
+ / - ,
CH + / - , and TV/VIDEO buttons to
control your TV. You can also use the buttons marked with a dot (•) to
control a Sony TV. To control the VCR, reset |TV|/| VIDEOI to | VIDEO|.
6 Getting Started