Sony CCD-TRV95 - Manual (Page 98)

Trouble check
Symptom Cause and/or Corrective Actions
Recording stops in a tew seconds. • The START/STOP MODE switch is set to 5SEC or X.-
Set it to ¿ 1.. (p. 16)
The cassette cannot be remov ed from
the holder. • The battery is dead.
Use a charged battery pack or the AC power adaptor,
(p. 8, 27)
S] and ^ indicators flash and no
function except for cassette ejection
works.
• Moisture condensation has occurred.
-> Remove the cassette and leave the camcorder for at least
1 hour. (p. 89)
The date or time indicator is flashing. • You pressed DATE and TIME together for more than 2
seconds.
The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
• The lithium battery is weak or dead.
Replace the lithium battery with a new one. (p. 81)
The tape does not move when a
video control button is pressed. • The POWER switch is set to CAMERA or OFF.
Set it to VTR.
• The tape has run out.
Rewind the tape or use a new one. (p. 22)
The Steady Shot function does not
activate. • STEADYSHOT is set to OFF.
Set it to ON. (p. 65)
• The Steady Shot function does not work when the wide
mode is set to 16:9 FULL.
The autofocusing function does not
work. • FOCUS is set to MANUAL.
■* Set it to AUTO. (p. 53)
• Shooting conditions are not suitable for autofocus.
Set FOCUS to MANUAL to focus manually, (p. 53)
The fader function does not work. • The START/STOP MODE switch is set to 5SEC or
Set it to (p. 16)
• The DIGITAL EFFECT function is working. {CCD-TRV99
only)
■> Cansel it.
No sound or only a low sound is
heard when playing back a tape. • The stereo tape is played back with FliFi SOUND set to 1
or 2 in the menu system.
Set to STEREO in the menu system, (p. 30)
Excessive high-pitched sound is
heard. • The picture has been recorded with WIND set to ON in
the menu system.
'*♦ When there is no wind, set it to OFF. (p. 30)
Data code becomes
(CCD-TRV99 only) • You are playing back a portion of tape on which you
wrote or erased the index signal. This is not a
malfunction, (p. 25)
The date or time indicator
disappears.
• Reset the date and time. (p. 83)
Picture
Symptom Cause and/or Corrective Actions
The image on the viewfinder screen
is not clear.
• The viewfinder lens is not adjusted.
Adjust the viewfinder lens. (p. 13)
>
a
(to be continued)
95