Items for vtr mode only, Hifi sound
Page 35: Tbc*

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing the mode settings

Items for VTR mode only

® HiFi SOUND

• Normallv select STEREO.

• Select 1 or 2 to plav back a dual sound track tape.

® EDIT

• Select ON to minimize picture deterioration when editing.

• Normally select OFF.

® TBC*

• Normally select ON, to correct for jitter.

• Select OFF to not correct for jitter. The picture may not be steady when played back.

Note on TBC setting

Set TBC to OFF when:

• Playing back a tape you have dubbed over.

• Playing back a tape on which you recorded the ignal of a TV game or similar

machine.

• The playback picture fluctuates.

® DNR*

• Normally select ON to reduce picture noise.

• Select OFF if the picture has a lot of movement, causing a conspicuous afterimage.

The following settings work only during playback

EDIT, HiFi SOUND, TBC, and DNR.

• These settings are retained even when the battery is removed, as long as the lithium

battery is in place.

This manual is related to the following products:

Page 35: Tbc*