Notes on re-recording, Recording with the date/time, To stop recording with the date and/or time – Sony CCD-TRV95 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Re-recording a picture in the middle of a recorded tape
Notes on re-recording
• The picture nnd the sound mav be distorted at the end of the inserted portion when it
is played back.
• If you re-record on the portion which contains non-recorded section, the zero memor)'
function may not work correctly.
• When the START/STOP МОЕТЕ switch is set to 5SEC or i , you cannot use the zero
memory function.
Recording with the date/time
Before you start recording or during recording, press DATE or TIME. You can record
the date or time displayed in the viewfinder or on the LCD screen with the picture.
Press DATE (or TIME), then press TIME (or DATE) to display the date and time
together.
The clock is set to East Coast Standard Time at the factory. You can reset the clock in the
menu system.
To stop recording with the date and/or time
Press DATE and/or TIME again. The date and/or time indicator disappears. The
recording continues.
63