Ccd-trv99 only, To change the end point – Sony CCD-TRV95 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Re-recording a picture in the middle of a
recorded tape
- CCD-TRV99 only
You can insert a scene in the middle of a recorded tape b\' setting the starting and
ending points. Tire prec ious recorded portion will be eraseci. When the RC time code
appears, set COUNTER to NORMAL in the menu system to display the tape counter.
(
1
) While the camcorder is in Standby niocde, keep pressing the + (forward
play'back) or - (reverse playback) side of EDITSEARCH, and release the button
where you want to end the insertion
[b].
The camcorder enters Standby mode
again.
(2)
Press COUNTER RESET. The counter resets to zero.
(3)
Keep pressing the - side of EDITSEARCH and release the button at the point
where you want to start the insertion
[a].
(4)
Press ZERO MEM on the Remote Commander. The ZERO MEM indicator
flashes.
(5)
Press START/STOP to start recording. The recording stops automatically at
the counter zero point.
I-IL
[a]
[b]
To change the end point
Press ZERO MEM to erase the ZERO MEM indicator, then repeat steps 2 to 5,
62