Writing the rc time code on a recorded tape, Ccd-trv99 only, To stop writing the rc time code – Sony CCD-TRV95 User Manual
Page 79: Tape (ccd-trv99 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Writing the RC Time code on a recorded
tape
- CCD-TRV99 only
You can write the RC time code on a recorded tape. Use the Remote Commander.
Before you begin, we recommend to set COUN TER to TIME CODE in the menu system
so that \ ou can yiew the RC time code.
(
1
) While pressing the small green button on the POWER switch, set it to VTR.
(
2
) Rewind the tape to the begiiming and set the camcorder to playback pause
mode.
(3)
Press TIME CODE WRITE on the Remote Commander. The TIME CODE
WRITE indicator appears in the viewfinder or on the LCD screen with the
WRITE indicator flashing.
(4)
Press ► or II to start playback. The WRITE indicator stops flashing and the
RC time code writing starts from 0:00:00:00.
-
1
1 1 POWER
C:: j ■ icAMERAi
1 m l "
REW©
„
pause
4 II PAUSE
6
► 0:00:00:01
TIM EC O D E
W RITE
To stop writing the RC time code
Press ■ (or any video control button).
76