Searching the boundaries of recorded date, Ccd-trv99 only, To search for the beginning of a specific date – Sony CCD-TRV95 User Manual
Page 72: Date (ccd-trv99 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching the boundaries of recorded date
- CCD-TRV99 only
You can search for the boundary between recording dates using the Data Code
automatically recorded on the tape.
There are two modes:
• Searching for the beginning of a specific date, and playing back from there
(Date
Search)
• Searching for the beginning of all days, one after another, playing back about 10
seconds of each
(Date Scan)
[a]
[b]
[c]
Each time you press DATE, the mode changes as follows:
Date Search —► Date Scan —► nothing
1________________________ I
To search for the beginning of a specific date
(1)
Set the POWER switch to VTR.
The video control buttons light up.
(
2
) Press DATE on the Remote Commander.
(3)
When the current position is
[b],
press to search towards
[a]
or press I
to search towards
[c].
69