Sony KP-61S65 - Manual (Page 20)

Displaying on-screen information
Press DISPLAY repeatedly until the desired
display appears.
Each time you press DISPLAY, the display changes as
follows;
Watching a video input picture
Press TVA/IDEO repeatedly until the desired
video input appears.
Each time you press TV / VIDEO, the display changes
as follows:
Status display* —*• XDS ON** —► 1 ON^*
t____
DISPLAY OFF -e-
DISPLAY
TV —*■ VIDEO 1
t___________
VIDEO 2 -*• VIDEO 3
TV/VIDEO
* Channel number, the current time, channel caption
(if set), and MTS mode (if SAP is selected) are
displayed. SAP indication disappears after three
seconds.
** Some programs are broadcast with XDS (Extended
Data Service) which shows a network name,
program name, program type, program length, call
letters, and time of the show. When you select XDS
with the DISPLAY button, this information will be
displayed on the screen if the broadcaster offers this
service.
*** Some programs are broadcast with Caption Vision.
When you select Caption Vision with the DISPLAY
button. Caption Vision will be displayed on the
screen if the broadcaster offers this service. (See
page
34 for selecting Caption Vision.)
To cancel the display, press DISPLAY repeatedly until
"DISPLAY OFF" appears. "DISPLAY OFF" goes off
after three seconds.
To return to the TV picture, press ANT so that a
channel number appears.
Changing the VHF/UHF input to the
AUX input
Press ANT.
"AUX" appears beside the channel number.
ANT
Pressing ANT again switches back to the VHF / UHF
input.
Setting the Sleep Timer
The projection TV stays on for the length of time you
specify and then shuts off automatically.
Press SLEEP repeatedly until the time (minutes)
you want appears.
Each time you press SLEEP, the time changes as
follows:
30 -*■ 60 -*■ 90 -*• SLEEP OFF
t__________________ I
SLEEP
To cancel the Sleep Timer, press SLEEP repeatedly
until "SLEEP OFF" appears, or turn off the projection
TV.
2 Q E N Operations