Notes – Sony KP-61S65 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connecting two VCRs for tape editing using MONITOR OUT
You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one VCR, and from the
line output of a second VCR.
(Rear of projection TV)
VCR (for playback)
AUDIO VIDEO
OUT
IN
Video and audio
outputs
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
Notes
• Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
• You can use the S video jack torconnect a VCR for playback
and the composite video connector to connect a VCR for
recording.
When connecting a single VCR to the projection TV, do not
connect the MONITOR OUT to the VCR's line input, while at
the same time connecting from the projection TV's VIDEO IN
connectors to the VCR's line output, as shown below.
(Rear of projection TV)
VIDEO IN r
"IMONITOR
JouT
VCR
i
\
LINE
IN OUT
DO NOT CONNECT IN THIS WAY.
Getting Started
-| -EN