Note about the ac power cord, Cable and antenna, Cable or antenna connections – Sony WEGA KV-36FS10 User Manual
Page 9: Connecting directly to cable or an antenna
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note about the AC Power Cord
The AC power cord is attached to the rear of
the TV with hooks. Use caution when
removing the AC plug from its holder. Gently
slide the cord in the upward direction, without
removing the cord from the two lower hooks.
Do not remove
the cord from
these hooks.
B
VHF only
or
VHF/UHF
or
Cable
75-oh m
coaxial cable
(Rear of TV)
VHF/UHF
300-ohm twin
lead cable
(Rear of TV)
VHF/UHF
Antenna connector
Cable and antenna
If your cable provider does not feature local
channels, you may find this set up convenient.
CATV cable
(Rear of TV)
AUX
(No connection "TO
CONVERTER" in this case)
Antenna cable
TO CONVERTER
dE
VHF/UHF
Select CABLE or antenna (ANT) mode by
pressing ANT on the remote control.
Cable or Antenna Connections
Connecting directly to cable or an
antenna
The connechon you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable (see
A);
older homes will probably have 300-ohm
twin lead cable (see B); still other homes may
contain both (see C).
VHF
and
75-ohm coaxial cable
I
A.
(Rear of TV)
VHF/UHF
EAC-66 U/V mixer
UHF
;=iJ (not supplied)
300-ohm twin lead cable
Note
In order to receive charmels with an antenna,
you will need to turn your CABLE to OFF and
perform the AUTO PROGRAM function, (see
page 23).