Sony WEGA KV-36FS10 - Manual (Page 27)

Using the TIMER 0 menu
( m D TIMER
DAYLIGHT SAVING: NO
CURRENT TIME SET
O N
DMENU
P| ____ -- AM
Move0® Select® Exit®
To select the TIMER 0 menu;
Display Highlight Select
MENU
lip V
Set DAYLIGHT SAVING before setting the clock.
DAYLIGHT
SAVING YES: Select to compensate for Daylight Saving Time.
NO: Select at the end of Daylight Saving Time.
CURRENT
TIME SET
Necesscuy for the
ON/OFF TIMEF With the CURRENT TIME SET menu open:
1
Press uD.
2 Press ♦ or until the current day Is displayed.
Press CZ) to select.
3 Press ♦ or ♦ until the current hour and AM/PM is
CURRENT TIME SET
►
__ - - AM
*:>MENU
MoveiBE Select® Exit®
4 Press ♦ or ♦ until the current minute is displayed, and press O.
Any loss of power will cause these settings to be cleared.
ON/OFF TIMER
Wcike up or
scheduled viewing
CURRENT TIME SET must be programmed before you
can use the ON/OFF TIMER.
With the ON/OFF TIMER menu open;
1 Choose the ON/OFF TIMER you would like to set and
press <3D.
2 Press ♦ or ♦ until the desired day or range of days is
displayed. Press CD to select.
3 Indicate the time that you want the TV to turn on
(hour, then minutes) by pressing ♦ or ♦ and then
CD.
4 Set the time duration (maximum of 6 hours) by pressing ♦ o
5 Press ♦ or ♦ until you reach the desired channel. Press GD
When you perform AUTO PROGRAM, all ON/OFF TIMER seWn
ON/OFF TIMER
> 1.
AM _h CH______
2.
AM _h CH______
DMENU
Select a position
SUN 12:00 AM
Move (BE Select® Exit®
r ♦ and then QD.
to select.
gs will be cleared.
2 1