Setting up the tv automatically – Sony WEGA KV-36FS10 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up the TV automatically
After you have finished connecting your TV,
you will want to run AUTO PROGRAM to set
up your channels.
The AUTO PROGRAM feature does not appt\/for
installations that use a cable box for all channel
selection.
V
•
Perform this function during the day, ivith the
antenna and/or cable properly connected, to ensure
that all available channels will be broadcasting and
receivable.
• If your cable or antenna is connected to AUX,
press ANT until AUX appears next to the channel
number.
Using the buttons on the top of the TV:
0 0 0 0 0
1 Press POWER to turn on the TV.
The initial setup screen appears.
POWER
AUTO PROGRAM: [CH + ]
EXIT:
[CH-]
First please connect
cable/antenna
To reset your TV to factory sctti}i;^s, turn the TV on.
Then, while pressin^^ the RESET huthvi on your remote
control, press the POWER button on your TV. The TV
will tur}i itself off, then back on.
2 Press CH + to run AUTO PROGRAM or
press CH - to exit.
OcD
- CHANNEL +
13