To activate system suspend mode, To return to normal mode, System save to disk mode – Sony PCG-717 User Manual
Page 40: To activate system save to disk mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Infrared Communication Device
To activate system suspend mode
Press Fti+Esc, or slide the power switcli forward and hold it for at least
four seconds. You can also use the PowerPanel utility to enter system
suspend mode.
To return to normal mode
Press any key.
System Save to Disk Mode
The state of the system is saved on the hard drive and power is turned
off. The power indicator light is off in this mode.
To activate system save to disk mode
Press Fn+F12. You can also use the PowerPanel utility to enter system
save to disk mode.
To return to normal mode
Turn on the computer by sliding the power switch forward. The
computer returns to its previous state.
^ When returning from system save to disk mode, the system status stored on the hard disk is
erased and the computer starts normally if you slide the power switch forward and hold for
at least four seconds.
□
□
Time to return to normal mode:
System standby < System suspend < System save to disk
Power consumption:
System standby > System suspend > System save to disk
3S