Sony PCG-717 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Notebook Computer
To remove the CD-ROM drive
1
Turn off fhe compufor before removing the CD-ROM drive.
2
There is an Eject lever on the bottom of the CD-ROM drive. Slide tliis
lever in the direction of the arrow.
3
Slide the drive out of the drive bay.
4
Insert the weight saver. See "Using the Weight Saver" on page 42.
To reinsert the CD-ROM drive
1
Turn off the computer.
2
If another device is in the drive bay, remove the device. See "To
remove a floppy disk" on page 27 or "To remove the second battery
pack" on page 41.
3
Insert the CD-ROM drive into the drive bay with the label side facing
up.
Drive bay
CD-ROM drive
(supplied)