Sony STR-D711 - Manual (Page 6)

Hooking Up the System
At first, this section describes about the connection with the other equipments, the antenna
connection, speaker connection and then the AC power connection.
• Do not connect the power cord to an AC outlet nor press the POWER switch before
accomplishing all other connections.
• The cable connectors should be fully inserted into the jacks. Loose connection may cause
hum and noise.
• Jacks and plugs of the connecting cord are color-coded as follows;
Red jacks and plugs: For the right channel of audio signals
White jacks and plugs: For the left channel of audio signals
Yellow jacks and plugs: For video signals
Connecting Audio Equipment
to OUTPUT
Turntable
CD player
DAT deck
Receiver Other equipment
White White
o>-»@L
R m
Red Red
to LINE OUT
D
to LINE OUT
to LINE IN
to LINE OUT
to LINE IN
Tape deck 2
Tape deck 1