Sony STR-D711 - Manual (Page 32)

Specifications
Audio Power Specifications Other Specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 8-ohm load, both channels driven,
from 20 - 20,000 Hz, rated 100 watts per
channel minimum RMS power, with no
more than 0.1 % total harmonic distortion
from 250 miliiwatts to rated output.
(U.S. A. modei oniy)
Amplifier section
Continuous RMS power output (8 ohms, at 20 Hz - 20 kHz less than
0.1 % total harmonic distortion) (FRONT)
STR-D911:110W+ now
STR-D711:110W+ 110W
Surround mode
Surround mode (8ohms at 1 kHz. THD 0.9 %)
STR-D911 STR-D711
FRONT
80W/ch 80W/ch
CENTER*
80W 80 W
REAR 25 W 20W
Dynamic power output
Harmonic distortion at rated
Frequency response
Inputs
150 W + 150 W (8 ohms)
200 W + 200 W (4 ohms)
output
Less than 0.1 %
PHONO; RIAA equalization curve
±0.5dB
CD. DAT. TAPE 1.2. VIDEO 1.2.3*;
10 Hz-50 kHz :“dB
• STR-D911 only
Sensitivity Impedance S/N (weighting
network, input level)
PHONO
(MM)
2.5 mV 50 kilohms 74 dB
72 dB** (A. 2.5 mV)
DAT. CD
VIDEO 1.2.
3*
TAPE 1.2
250 mV 50 kilohms 95 dB
80 dB** (A. 250 mV)
Outputs
MUTING
DBFB
TONE
•STR-D911 only
•* 78IHF
REC OUT VIDEO 1
(AUDIO) OUT
Voltage 250 mV
Impedance 10 kilohms
HEADPHONES Accepts low and high impedance
headphones
-20 dB
+10 dB at 70 Hz
±8 dB at 100 Hz and 10 kHz
* (only in theDOLBY SUR and THEATER modes)
32