Maintenance information and precautions, Cieaning the video head, Cleaning the lcd screen – Sony DCR-TRV315 User Manual
Page 72: Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Maintenance information and precautions
I Ttrt'irirr
Cieaning the video head .
To ensure normal recording and clear pictures, clean the video heads. The video head
may be dirty when:
• mosaiC'pattem noise appears on
the
playback picture.
• playback pictures do not move.
• playback pictures are hardly visible.
• playback pictures do not appear.
• the O indicator and " A CIXANING CASSETTE" message appear one after another
or dte O indicator flashes on the LCD screen or in the viewfinder.
If the above problem,
[a]
or
|b]
occurs, clean the video heads with the Sony V8-25CLD
cleaning cassette (not supplied). Check the picture and if the above problem persists,
repeat cleaning.
Cleaning the LCD screen
If fingerprints or dust make die LCD screen dirty, we recommend using a LCD
Cleaning Kit (not supplied) to clean the LCD screen.
Removing
4ust
from inside the viewfinder
- DCR-TRV203/TRV210/TRV310
(1) ORemove the screw with a screwdriver (not supplied). ©Then, while sliding
the RELEASE knob, ©turn the eyecup in the direction of the arrow'and pull it
out.
(
2
)
Qean the surface with a commercially available blower for a still camera.
(3)
Reattach the eyecup and replace the screw.
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
72