To view a still picture (playback pause), To advance the tape, To rewind the tape – Sony DCR-TRV315 User Manual
Page 24: To change the playback direction, To view the picture at slow speed (slow playback), To view the picture at double speed, To view the picture frame-by-frame, To search the last scene recorded (end search)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back a tape
To
Operate
control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)
Press II during playback. To resume playback, press II or ►.
To advance the tape
Press ►► in the stop mode. To resume normal playback, press ►.
To rewind the tape
Press -ee in the stop mode. To resume normal playback, press ►.
To change the playback direction
Press < on the Remote Commander dining playback to reverse the playback direction.
To resume normal playback, press ► .
To locate a scene monitoring the picture (picture search)
Keep pressing or ►► during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing
while rewinding or ►► while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press !► on the Remote Commander during playback. For slow playback in the reverse
direction, press <, then press !► on the Remote Commander. To resume normal
playback, press ►.
To view the picture at double speed
Press x2 on the'Remote Commander during playback. For double speed playback in the
reverse direction, press <, then press x2 on the Remote Commander. To resume
normal playback, press ►.
To view the picture frame-by-frame
Press !!► on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press -^11. To resume normal playback, press ►.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mixle. The last 5 seconds of the recorded section plays
back and stops.
•
In the various playback modes
• Noise may appear when your camcorder plays back tapes recorded in the Hi8/
standard 8 system.
• Sound is muted.
• The previous recording may appear as a mosaic image when playing back in the
Digitals I) system.
When the playback pause mode lasts for 3 minutes
• Your camcorder automatically enters the stop mode. To resume playback, press
• The previous recording may appear.
Slow playback for tapes recorded in the Digitals B system
The slow playback can be performed smoothly on your camcorder; however, this
function does not work for an output signal from the ^ DV IN/OUT jack.
24