Note, When the overlap indicator appears, When start/stop mode is set to 1 or 5sec – Sony DCR-TRV315 User Manual
Page 32: Note on the bounce function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Fader function
Note
• The overlap function works only for tapes recorded in the Digital81) system.
• You caimot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions.
- Digital effect
- Low lux mode of PROGRAM AE (Overlap function only)
- NightShot +SI
0
W shutter
- Photo recording
When the OVERLAP indicator appears
The camcorder automatically memorizes the image recorded on a tape. As the image is
being memorized, the OVERLAP indicator flashes fast, and the playback picture is
displayed. At this stage, the picture may not be recorded clearly, depending on the tape
condition.
When START/STOP MODE is set to 1 or 5SEC
You cannot use the fader function.
While using the bounce function, you cannot use the foiiowing functions;
-Exposure
-Focus
-Zoom
-Rcture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
-D ZOOM is set to ON in the MENU settings
-Wide mode
-Picture effect
-PROGRAMME
32