Inserting a scene – Sony DCR-TRV315 User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Inserting a scene

You can insert a scene in the middle of a recorded tape by setting the start and end
points. The previously recorded frames between these start and end points will be
erased. Use the Remote Commander for this operation.

^ [a] [b]

>
?

(1)

While your camcorder is in the standby mode, keep pressing EDITSEARCH,

and release the button at the insert end point

[bj.

(2)

Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and

the tape counter resets to zero.

(3)

Keep pressing the - @ side of EDITSEARCH and release the button at the

insert start point

[a].

(4)

Press START/STOP to start recording. The scene is inserted. Recording stops

automatically at the tape counter zero point. Your camcorder returns to the
standby mode.

•■ I

EDITSEARCH

* •

Notes

•The zero set memory function works only for tapes recorded in the DigitaS H system.
• The picture and the sound may be distorted at the end of the inserted section when it

is played back.

If you re-record on the section which contains a non-recorded section

The zero set memory function may not work correctly.

When START/STOP MODE is set to

or 5SEC

You cannot use the zero set memory function.

This manual is related to the following products:

DCR-TRV310