Sony SLV-373UC - Manual (Page 4)

Precautions
On Safety On Cleanii^'
• Operate the unit only on 120V AC, 60 Hz.
• Should anything fail into the cabinet, unplug the unit
and have it checked by qualified personnel before
operating it any further.
• One blade of the plug is wider than the other for the
purpose of safety and will fit into the power outlet only
one way. If you are unable to insert the plug fully into
the outlet, contact your dealer.
• Unplug the unit from the wall outlet if it will not be used
for an extended period of time. To disconnect the cord,
pull it out by the plug. Never pull the cord itself.
On Installation
• Allow adequate air circulation to prevent internal heat
build-up.
• Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block
the ventilation slots.
• Do not install the unit near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
• The unit is designed for operation in a horizontal
position. Do not install it in an inclined position.
• Keep the unit and cassette tapes away from equipment
with strong magnets, such as microwave ovens or large
loud speakers.
• Do not place any heavy object on the unit.
• Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution.
• Do not use any type of solvent, such as alcohol or
benzine, which might damage the finish.
On Rep^Mns
• Do not throw away the carton and packing materials.
They make an ideal container in which to transport the
unit. When shipping the unit to another location, repack
it as illustrated on the carton.
If you have any questions about this unit, contact your
Sony dealer or a qualified technician.
On Operation
• When the unit is not in use. turn the power off to
conserve energy and to extend the life of the unit.
• Remove and store video cassettes after recording or
playback.
• Store the cassettes in their cases and keep them in an
upright position to prevent intrusion of dust and uneven
winding.