General, Fix settings (see page 76) – Sony KFO50WE610 User Manual
Page 97
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
General
How to restore Video settings
to factory settings
How to restore Audio settings
to factory settings
Cannot cycle through the other
video equipment connected to
the TV
Cannot operate Menu
Press
RESET
on the remote control while in the Video Menu (see page 69).
Press
RESET
on the remote control while in the Audio Menu (see page 72).
Be sure the
Video Label
option is not set to
Skip
(see page 83).
If a menu option appears in gray, this indicates that the menu option is not
available.
Lost password
LED on the display unit is lit
LCD projection TV is fixed to
one channel
In the password screen (see page 78), enter the following master password:
4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
blinks continuously, this may indicate the TV needs a service.
The TIMER LED indicates that the timer is set. When the timer is set, this LED
will remain lit even when the LCD porjection TV is turned off.
Use
Auto Program
in the Channel menu to add receivable channels that
are not presently in TV memory (see page 76).
Check your
Channel
Fix settings (see page 76).
97