Audio, Channels – Sony KFO50WE610 User Manual
Page 96
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio
Good picture, no sound
Audio noise
Cannot gain enough volume
when using a cable box
Sound seems weak or
insufficient
Cannot raise the volume on
external speakers
Press
MUTING
so that
Muting
disappears from the screen (see page 44).
Make sure the
Speaker
option is set to
On
in the Audio Menu (see page
73).
Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
Increase the volume of the cable box using the cable box’s remote control. Then
press
FUNCTION TV
button and adjust the TV’s volume.
The TV’s audio might be set to
Auto SAP
or
Mono,
when it might be better set to
Stereo.
In the Audio Menu (see page 72), set the
MTS
setting to
Stereo.
If
already set to
Stereo,
switch to
Mono
(which may reduce background noise
during weak stereo broadcasts).
If the
Speaker
option is set to
Off
and the
Audio Out
option is set to
Fixed
(in
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 73). Or, to use the TV remote control, set the
Audio Out
option to
Variable.
To turn on the TV speakers, set the
Speaker
option to
On
(see page
73).
Channels
Cannot receive upper channels
(UHF) when using an antenna
TV is fixed to one channel
Cannot receive any channels
when using cable TV
Cannot receive or select
channels
Cannot receive digital channels
(when a DTV receiver is
connected)
Change the
Cable
option to
Off
(see page
76).
Use
Auto Program
in the Channel Menu to add receivable channels that are not
presently in the TV’s memory (see page 76).
Use
Auto Program
in the Channel Menu to add receivable channels that are not
presently in the TV’s memory (see page 76).
Check your Channel Fix settings (see page 76).
Use
Auto Program
in the Channel Menu to add receivable channels that are not
presently in the TV’s memory (see page 76).
Check your cable settings.
Make sure the
Cable
option is set to
On
in the Channel Menu (see page
76).
Use
Auto Program
in the Channel Menu to add receivable TV channels that are
not presently in TV memory (see page 76).
Check the connections between the DTV receiver and the LCD projection
TV (see page 39).
Check your local listings to find out if you can receive digital broadcasts in
your area.
96