Sony KFO50WE610 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The indicators show the current status of your LCD projection T V. If the
LAMP indicator flashes, see “Flashing Indicators on the Front of the
Monitor” on page 98.
To minimize screen reflection, its surface has a special coating. Read the
instructions “Use of the Cleaning Cloth” on page 12 carefully before
cleaning.
Inappropriate cleaning methods could damage the finishing.
Your LCD projection T V uses a projection lamp as its light source. Note the
following:
After turning on your LCD projection T V, it may take a while before the
picture appears (1 minute or less).
; When the projection lamp wears out, the screen image becomes dark.
Replace the lamp with a new Sony XL-2100U replacement lamp (not
supplied).
^ Be sure to attach the lamp cover securely; otherwise, your LCD
projection TV will not turn on. For details on lamp replacement, see
"Replacing the Lamp" on page 13.
^ The light emitted from the lamp is quite bright when your LCD projection
TV is in use. To avoid eye discomfort or injury, do not look into the
housing when the power is on.
11