Continued) – Sony KFO50WE610 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loosen the two screws that secure the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front glass
of the lamp or the surro unding parts.
Loosen
the
two
screws
with
the
hex key supplied with the lamp.
Hold the handle and pull
straight out.
-ife) After it has cooled, place the removed lamp into the empty box of the
replacement lamp. Never put the removed lamp into a plastic bag.
Mount the new lamp.
Be sure to attach the new lamp securely.
Mount
the
new
lamp
securely
into the lamp receptacle.
illustration using the supplied hex key.
Mount the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
Match the projection of the right side of the lamp cover with the hole of the
unit, and replace the lamp cover as it was.
(Continued)
1 5