0 using the timer menu, To select the timer 0 menu, Using the timer menu – Sony KP-61V90 User Manual
Page 33: 0 menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0 Using the Timer Menu
D a y i f g h t S a v i n g s ; O n
ft Current Time
^ Timer
. . .
. . : . . A M
M
dvs
I* Selggfgi End B
After setting the dock you can use the timer
to turn the projection TV on and off.
For detailed Information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
To select the Timer
0 menu:
Display Highlight © Select
TIp-f
Set daylight saving time belbre setting the clock. Any
loss of power will cause these settings to be erased.
Daylight Savings
.AíííBí^aSaafly
gdjimtsi №ú firm.
Current Time
Msxmasry fee th9
Thmr.
Timer
WB'kS up cr
soñstyjísá vtswifis.
Spring: Select On to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall; Select Off at the end of Daylight Saving Time.
The current time moves back one hour.
□
ÜU rr*
1 lirrifi
m.... .. : .AM
asiWK,® tr« 1^^
1 Press QD, then press + or ♦ until the current day
(Sun^Sat) is displayed, and press
GD.
2 Press * or + until the current hour (1-12) and
AM/PM is displayed, and press
GD.
3 Press * or + until the current minute (00-58) is
displayed, and press (GG.
The clock has now started. Press MENU to exit.
1 Press + or + until the desired day or range of days
(Every Sun-Sat, Every Mon-Fil, Sunday, Monday,...
Saturday, Every Sunday,... Every Saturday) is
displayed, and press (GG.
2 Press + or + until the time (hours and minutes) that
you want the projection TV to remain on is displayed,
and then press
(GG.
3 Press * or + to set the time duration (maximum of 6 hours) and press CS.
4 Press * or + to select the desired channel and press
GD.
The timer is now set. The TIMER/STAND BY indicator on your projection TV
vi/ill be lit.
Press MENU to exit. To cancel yourtimer setting, press RESET while in the
Timer window. Performing Auto Program will erase all Timer settings.
Sun
End