Connecting a satellite receiver (sat), Note – Sony KP-61V90 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•f
ImtaUing anti Connecting the Projectiof! ry (continuea)
Disconnect all power sources before making any connections.
Connecting a satellite receiver
(SAT)
1
Connect the cable from the satellite
antenna to the satellite receiver.
2
Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF
on the projection TV.
3
Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
Note:
• To view input from the satellite receiver,
select the video input which the satellite
receiver Is connected to by pressing TV/
VIDEO on the remote control.
pear ciif pi-'opciion T¥|
Cable/
AntBriina
Satellite antenna
I safe!«
1
SAT
JsiOhat; MiML w
1
BK-Ï4II inol supplied)
¥C-1S¥/30¥ Cost supplieit
12