B using the video menu, To select the video b menu, To restore the factory settings – Sony KP-61V90 User Manual
Page 30: Note, A£§iistmg voiji, Imms) (contmueti)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Jif
A£§iistmg Voiji
' ;
' imms) (contmueti)
B Using the Video Menu
vid aa
Model
Viviij
t ns ^ fi 1;
V i 01 ! rfs ^ :
e
g
U
on ;&ff
0
I» SBlect
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
To select the Video B menu:
Disptey Highiight B Select
MENU
To restore the factory settings
Press RESET on the remote control while the
Video menu is selected. To restore each
"Mode” to the factory setting, press RESET
after selecting the mode to be reset.
Note:
“Picture Adjustment,“ “Color Temp“ and
“Noise Reduction" can only be changed In
“Movie,“ “Personal 1“ and “Personal 2“.
2S
Mode
You can choose one of live different video modes that best suits the program you
Cusfefflii!®#
are watching. You can also perform the “Picture Adjustment" {such as
liialzm
“Brightness," “Color,” etc.) for “Movie," “Personal 1” or “Personal 2" to suit your
taste.
Vivid: Select for enhanced picture contrast and sharpness.
Standard; Select to display a standard picture for normal viewing
environments.
Movie: Select to display a finely detailed picture for low light environments.
Personal 1, Personal 2: Select to customize the “Picture Adjustment” of the
Video menu according to your personal preference.
Press PICTURE MODE on the remote control for direct selection of a "Modd'
setting.
Picture
First select “Movie,” “Personal 1" or “Personal 2” from “Mode," then highlight the
Adjustment
desired option using the ♦ or button and press
GD
to display the adjusting
Piciiiiv
slider of the selected option.
Picture; Adjust slider right (up) to increase picture
contrast; left (down) to decrease it.
Brightness; Adjust slider right (up) to brighten the
picture; left (down) to darken it.
Color: Adjust slider right (up) to increase color
intensity: left (down) to decrease it
Hue; Adjust slider right (up) to increase the green
tones; left (down) to increase the red tones.
Sharpness: Adjust slider right (up) to sharpen the
picture; left (down) to soften it.
Picture !
Co I Of i
Mpy№ I» SBIfldt«
tnú
Color Temp
Cool: Select to give the white colors a blueish tint.
White mtemitif
Neutral: Select to give the white colors a neutral tint.
aiJjimtmml:
Warm: Select to give the white colors a reddish tint.
Noise Reduction Select On to reduce picture noise.
Noise m-diioiKxi
Select Off to cancel the featu re.
“Noise Reduction’ can be set separatety from the “Mode’ settings of the Video
menu.