Connecting an audio system, Note – Sony KP-61V90 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•f
¡mtalling and Connect«n-liv. fayection T¥ {continued)
Connecting an audio system
For more dynamic sound, connect an audio
system to the projection TV.
1
Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line Inputs (e.g. Tape-
2, A U X l , etc.) on the stereo.
2
Set the stereo to the chosen Line Input
and use the Audio menu to set the audio
output and switch the TV’s speakers off.
(see “Audio Out’ and “Speaker” on page
28)
Note:
• You can adjust VOLUME. "Bass,”
“Treble,” “Balance,” “MTS/SAP” and
“Effect” with the supplied remote control.
The control Items except VOLUME can be
adjusted only when “Audio Out” Is set to
“Variable” In the Audio menu, (see
“Audio Out” on page 28)
{Ii©lir of prqjsclion T¥|
Starwo aimpiitiar
Disconnect alt power
sources
before making any connections.
@
©
I----------------------
1
AUDfO-l.
(wsrliitsi)
AUOiO-R
iradj
Line inputs
etC-MA
{not SUppliKi)
1i