Sony KP-61V90 - Manual (Page 27)

Watchinq Two Proqrams at One Time — PIP
The Plcture-ln-Plcture (PIP) feature allows
you to view two channels simultaneously,
one In the full size “main” picture and one In
a smaller “window" picture.
You can move the window picture to any
location on the screen. (Free Layout Picture-
In Picture)
The «iymtsoi or *+“
intiiCiles whish preture's
T¥ channei csr input
sourca «Г! be clhanged.
The symija!
irislisates which
piet«re=s sound is being
reeei¥»il.
T¥ shetinei or input-
sotH'se mode tor the
■ mairj pietiire® ^eSSo«'-
greeifl~golof®ii}
T¥ than»! or input-
soiu't® motlis for the
leititlo* picture®
{white-coloredi
• It will dim in about 3 seconds;
Notes:
• The aux antenna input on the rear panel
will not be able to be selected In the PIP
window.
• If you use a cable box connection, you
will not be able to watch two different
programs at the same time.
PIP
0
Press to display a window picture.
Each time you press this button, the picture size will change
(1/9 —*1/16 —*no display).
To close the window picture, press PIP repeatedly until it disappears.
POSITION
Press POSITION repeatedly to change the location of the window picture
0
(counterclockwise) around the main picture.
You can also change the location by pressing the *, +, + or+ button.
The window picture moves in the direction of the arrow indicated on the
pressed button.
Press to select either the main or window picture in order to change the
ACTIVE TV channel or video source using the white labeled buttons below. The
0 symbol (or “+") will appear to indicate which picture’s channel or input
mode can be changed.
TV/VIDEO
Press repeatedly to scroll through the available video inputs for the
Q picture on which the symbol ‘V (or “+”) is displayed, (see “TV/VIDEO” on
isteimJ
page 21)
ШШ)
lip#
ffyou press RESET in PIP mock, the window picture will mow to the bottom right (factory-preset
location).
23